Features

Connect U2SCX to your SCSI device, and plug its USB cable to the USB port. Available to use in just a second. Allows Hot-Swappable as an USB device. No need to restart the OS, open the case, install SCSI board, or change SCSI ID setting. Fully compatible with both USB2.0-enabled port and USB1.1-enabled port. Automatically detected and mounted as an USB1.1 Full Speed device with USB1.1-enabled port. U2SCX get it's own power through the Term Power pin from the SCSI device. Supports High-speed USB2.0. Date transfer rate up to 480 Mbps. Fully compatible with various SCSI devices or SCSI based Application Software; Scanners, Film Scanners, CD-ROM, CD-R/W, DVD, Zip, Jaz, HDD, MO,VueScan, WinBench and more. Refer to "Certified SCSI Devices" below. The U2SCX has two different operation mode and switches automatically. [USB mass storage mode]   With Microsoft standard Mass Storage class driver. Supports only one SCSI device per one U2SCX. [SCSI emulation mode]   With RATOC original driver. Supports up to seven SCSI devices in daisy per one U2SCX. You must use this mode for image scanners, film scanners or other SCSI devices except mass storage devices. *SCSI emulation mode is only for Windows. Ultra-slim and compact design allows you to use with another SCSI connector either side-by-side or stacked. System Requirements Mac Works as an USB 2.0 device with USB 2.0 enabled Macintosh with Mac OS X 10.2.7 or later, 10.3.x, 10.4.x. *Note :USB 2.0 embedded controller or add in host adapter required. Windows PC Windows XPx64 / XP / Me / 2000 / 98SE *Note :USB 2.0 embedded controller or add in host adapter required. SCSI device Hi-Density 50 pin female SCSI-2 connector Term-Power output capability Single-End interface Internal or external Terminator   Certified SCSI Devices HDD CD-RW (Only Windows) DVD-RAM/ROM/RW (Only Windows) Removable Disk (MO, ORB, Zip, Jaz) Image Scanner (Windows or Mac OS X 10.3.4 with Hamrick VueScan 8.0.4 ) Film Scanner (Windows or Mac OS X 10.3.4 with Hamrick VueScan 8.0.4 ) Refer to the compatible device list for more detail. Compatible device list for Windows Compatible device list for Mac OS   Specifications Bus interface [USB] USB 2.0/1.1 [SCSI] Ultra SCSI Data transfer rate [SCSI] 20 MB/sec with Ultra SCSI devices (synchronous) 10 MB/sec with FAST SCSI devices (synchronous) 5 MB/sec (asynchronous) [USB] 480 Mbps(High Speed)/12Mbps (Full Speed) Connector Type [SCSI] Hi-Density 50 pin Male SCSI-II connector [USB] USB TypeA Plug with 1 meter (39') USB 2.0 certified cable. Package includes U2SCX USB2.0 to UltraSCSI converter U2SCX software CD-ROM [MacOS software] - SCSI Configuration Utility [Windows software] - Format Utility - SCSI Configuration Utility User's Guide Physical characteristics 51 mm(W) x 52 mm(D) x 18 mm(H) 98 g Operating requirements   DC +5V 300mA (Max). SCSI device must provide the power through SCSI Termination Power output pin. If SCSI termination power is not available, you need to connect an OPTIONAL AC adapter (sold separately). USB Bus Power 2 mA (Max) Temperature from 0°C to 55°C Relative humidity 20-80% (Non-condensing) Options High-Density 50F to Centronics 50M adapter AC Adapter for U2SCX Output DC5V/2A 1.7x4.0mmplug Center Positive Polarity (center"+", External"-") Regulated Output